APW3++ PSU Power Supply For Antminer S9 L3 Bitcoin Miner Miners Mining

APW3++ PSU Power Supply For Antminer S9 L3 Bitcoin Miner Miners Mining

by AntMiner
Price: $160.00
* Price as of 17:27 CET - Details
BrandAntMiner
SKUB073W7C49D
GTIN0614024327281
UPC614024327281
Share This Page

Product Description

Import duties, taxes and charges are buyer's responsibility, not included in item price or postage charge.
Do not accept any return & refund of items with no quality problem but just because you change your mind and no longer want it.
Must be contacted within 48 hours of items received if device isn't working properly.

Note:
1.The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

Specifications:
Output
DC Voltage: 12.15V
Rated Current (220V input): 133A
Rated Current (110V input): 100A
Rated Power(220V input): 1600W
Rated Power(110V input): 1200W

Ripple & Noise: <1%
Voltage Regulation: <2%
Source Regulation: <1%
Load Regulation: <1%
Setup, Rise Time: <2S
Power off Protection Trip Time: >9mS
Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Input
Voltage Range: 100-240V AC
Starting Voltage: 95-105V AC
Frequency Range: 47-63Hz
Power Factor: >0.95 (full load)
Leakage Current: <1.5mA (220V 50Hz)

Protection
Low-voltage Input: 80-89V AC
Output Short Circuit: Yes
Output Overcurrent: 134-185A max.
Overheat Protection: Yes

Environment Conditions
Operating Temperature: -20-50 ºC 
Operating Humidity: 20% - 90% relative humidity (non-condensing)

Structure
Dimensions: 220mm*108mm*62mm

Cooling
Fan: Forced-air cooling

Product Features

  • 1. The power cord is not included, please find one with at least 10A from your local market.
  • 2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
  • 3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

More Power Supplies