HDMI Extender HDBaseT, Ethernet Port for LAN of TV or Laptop, Two-Way PoE&IR, Uncompressed 4Kx2K@60Hz Over Single CAT5e/6, 70M 4K, 100M 1080P, HDR&Dobly Vision+HDCP2.2+RS232, Dolby Atmos & DTS:X
Make sure all devices are powered on.(Source, extender, display devices)
2.INDICATOR:Make sure LED indicators of transmitter and receiver are normal according to user manual.
3.DEVICES: Make sure picture can be shown normally when connecting source to display devices directly.
4.CABLE:Try to plug in and out HDMI/CatX cable or change another HDMI/CatX cable.
4-1 Cat 5e/6/6a/7 cable is recommended,do not use Cat5 cable.
4-2 Make sure CATx cables is less than 330ft for 1080p,230ft for 4K resolution.
4-3 Make sure the two connectors of one CATx cable are same standard(EIA/TIA 568B).
5.COMPATIBILITY:Please test other source and display devices to determine whether it is a compatibility issue.
6.IR bi-directional Control:
6-1 Plug IR receiver cable into IR in port.
6-2 Plug IR emitter cable into transmitter IR out port;Make sure the IR emitter head is secured over IR window center of source device.
1xPower Supply(DC 18V 1A)
1xWide-band IR Receiver(30KHz~50KHz)
2xPhoenix Connectors(3 Pin)
Power Supply:DC 18V 1A
Power Consumption:11W (Pair)
Input Resolution Support:74096x2160@60/50/30/25/24Hz, 3840x2160@60/50/30/25/24Hz,1080p@2@60/50/30/25/24Hz,1080i,720p,
Output Resolution Support:4096 x2160@60/50/30/25/24Hz,3840x2160@60/50/30/25/24Hz,1080p@2@60/50/30/25/24Hz,1080i,720p,
Transmission Distance:Cat 5e/6: 4K:max.70m,1080P: max.100m;Cat 6a/7: 4K:max.100m,1080P:max.100m
Support Audio Format:Stereo,LPCM 5.1,LPCM 7.1,Dolby True HD, DTS-HD Master Audio.
- 【Uncompressed 4K】: HDBaseT extender ,single cable solution for long distance transmission with high speed internet.Supports 1080P@60Hz up to 330 feet (100m) or 4K@60Hz (4:2:0) up to 230 feet (70m) over qualified Cat5e/6a cable, HDCP 2.2 compliance.It's with HD multi-channel audio( Stereo, LPCM 5.1/7.1,Dolby True HD, DTS-HD Master Audio) pass through.
- 【Internet Access】: HDMI extender with integrated 10/100 Ethernet port for network capability; It's with automatic EDID management and supports RS232, 2-Way IR pass through,allow the user to bi-directional control of source and display devices from either location via IR and RS232.In addition,RS232 open protocols available for market leading third party control systems.
- 【Bi-directional PoE】: Only one power adapter is needed at either TX or RX side.Also,15mm thickness ultra slim size and mounting ears for wall mounting housing design and easy installation. It does NOT support ARC.
- 【High Reliability】: Built-in surge/Lightning protection.Superior ESD protection: +/- 8KV(Air-gap discharge ) +/- 4KV(contact discharge )
- 【Durability】: 1-Year Warranty, and easy-to-reach friendly customer service. (AV Access).